EL series

Centrifugal axial flow pump entirely made of stainless steel

Flow rate up to 720 lt/min
Head up to 23 mt
Operating temperature max 110°C
Operating pressure max 3 bar
Motors from 0.5 HP to 6 HP – 1400/2800 RPM
Entirely made of AISI 304/316 high thickness stainless steel
Suitable for aggressive liquids with suspended solids

High reliability

The high quality and very low internal frictions produced make this pump very reliable even for heavy duty applications

Small size

Highly compact and lightweight pump, without affecting its performance and hydraulic efficiency

Reduced speed

Some models are supplied with a 1400 RPM motor, which ensures a softer and more gentle pumping action

High thickness pump casing

High thickness steel (3mm) which ensures a higher mechanical and corrosion resistance, and therefore a longer life

Zone at risk of explosion

To operate in zones at risk of explosion, motors compliant with Atex standards are supplied

Easy to dismantle

The cleaning and replacement of the mechanical seal and of the impeller are incredibly simple as the pump can be taken apart with ease

Stainless steel axial flow impeller

The impeller is an axial flow impeller and is entirely made of AISI 304 or 316 stainless steel. This construction makes it ideal for handling aggressive, filamentous and solid-laden liquids

Maximum hygiene

The pump casing is internally and externally polished to ensure the highest level of hygiene. In addition, the internal surfaces are smooth and with no sharp edges to provide optimal efficiency

Greater safety

To allow using EL pumps in potentially explosive environments Atex motors are supplied

The EL series pumps have the following features:

Stainless steel axial flow impeller suitable for handling aggressive, filamentous and solid-laden liquids
Suitable for handling aggressive liquids
High thickness steel (3mm) which ensures a higher mechanical and corrosion resistance, and therefore a longer life
Very easy to take apart to clean or replace the mechanical seal
The version fitted with a 1400 RPM motor ensures a more delicate pumping action
Explosion proof motors can be provided to pump flammable liquids
Low maintenance and high reliability
Lightweight and compact design
Mechanical seal with NBR, FPM or PTFE elastomers

Their resistance to chemical aggressiveness makes them suitable for the chemical, pharmaceutical and textileindustries, their capacity to pump dirty liquids makes them suitable for the treatment of waters in general and of industrial waste, while their versatility suits the wine and food industry.

On request, pumps can be supplied on a stainless steel carriage fitted with a switch.

The pumps can also be supplied with DIN 11851, Garolla or Macon fittings.

Technical Specifications

Power and capacity are referred to working with water

MOD	MOTOR			FLOW RATE [lt/min] ± 5%															Ø PORTS
MOD	HP	RPM	TYPE	0 mt	1 mt	2 mt	3 mt	4 mt	5 mt	7 mt	9 mt	10 mt	12 mt	15 mt	18 mt	20 mt	22 mt	23 mt	Ø PORTS
EL-110	0.5	1400	Single-phase	100	70	41	12	–	–	–	–	–	–	–	–	–	–	–	Ø 1″ BSP male thread
	0.5	1400	Three-phase	100	70	41	12	–	–	–	–	–	–	–	–	–	–	–
	0.5	2800	Single-phase	180	172	163	154	144	133	109	80	63	24	–	–	–	–	–
	0.75	2800	Three-phase	180	172	163	154	144	133	109	80	63	24	–	–	–	–	–
EL-130	0.75	1400	Three-phase	191	168	139	99	28	–	–	–	–	–	–	–	–	–	–	Ø 1 ¼” BSP male thread
EL-130	2	2800	Three-phase	–	–	–	–	–	–	–	301	287	257	193	23	–	–	–
EL-130 R	1.5	2800	Single-phase	448	359	306	264	228	196	141	92	70	–	–	–	–	–	–
EL-130 R	2	2800	Three-phase	448	359	306	264	228	196	141	92	70	–	–	–	–	–	–
EL-130	2.5*	2800	Three-phase	–	–	–	–	–	–	–	301	287	257	193	23	–	–	–
EL-150	2.5*	1400	Three-phase	220	206	186	145	77	50	–	–	–	–	–	–	–	–	–	Ø 1 ½” BSP male thread
EL-150	4.5*	2800	Three-phase	–	–	–	–	–	–	–	–	399	354	280	197	132	57	12	Ø 1 ½” BSP male thread
EL-150 R	4.5*	2800	Three-phase	552	522	492	463	433	402	342	282	251	191	100	–	–	–	–	Ø 1 ½” BSP male thread
EL-150	6*	2800	Three-phase	723	696	669	642	614	585	527	468	437	375	281	183	117	51	–	Ø 1 ½” BSP male thread

*The electrical power of these models may vary according to the brand of the motors and the Atex execution. However, the performance of the pump remains unchanged.

RIF	DESCRIPTION	MATERIALS
1	Flange	Stainless Steel
2	Pump Casing Disc	AISI 304 or 316 Stainless Steel
3	Body Seal Ring	NBR or FPM
4	Impeller Screw	Stainless Steel
5	Impeller Screw O-Ring	NBR or FPM
6	Impeller	AISI 304 or 316 Stainless Steel
7	Seal Rotating Part	Graphite, Stainless Steel, NBR or FPM or PTFE
8	Seal Fixed Part	Ceramic, NBR or FPM or PTFE
9	Compensation Ring	Steel
10	Pump Casing	AISI 304 or 316 Stainless Steel
11	Spacing Ring	Stainless Steel
12	Electric Motor	——-
14	Washer	Steel
15	Tie Rod	Stainless Steel

MOD	MOTOR		Dimensions [mm]														Ø
MOD	HP	RPM	A	B	C	D	E	F	G	H	I	L	M	N	O	P	Ø
EL-110	0.5	1400	331	188	72	75	90	50	116	101	8	28	90	112	137	10	1″
EL-110	0.75	2800	331	188	72	75	90	50	116	101	8	28	90	112	137	10	1″
EL-130	0.75	1400	363	208	80	87	100	55	121	122	10	37	100	125	155	10	1 ¼”
EL-130 / EL-130 R	2	2800	373	225	90	90	100	62	121	125	10	37	100	140	175	12	1 ¼”
EL-130	2.5	2800	398	225	90	90	125	62	121	150	10	37	100	140	172	13	1 ¼”
EL-150	2.5	1400	440	255	100	97	140	73	130	170	12	43	112	160	198	13	1 ½”
EL-150 / EL-150 R	4.5	2800	473	280	112	108	140	95	130	172	13	43	112	190	227	17	1 ½”
EL-150	6	2800	475	280	112	110	140	95	130	172	13	43	112	190	227	17	1 ½”